: Ensure the spring-loaded brake lever (the piece that stops the reels from spinning freely) is pushed back so the spools can sit flat.
: This is the most critical step. Pull a slack length of tape and guide it through the "tape path" at the front of the cassette. It must go behind the two plastic guide posts and over the small rollers at each corner. Position the Springs and Locks : vhs_x_e_v_czarne_czy_czerwone_prod_majki_offici...
For a visual walkthrough, you can find detailed repair guides on Legacybox or watch a spool-swapping tutorial on YouTube . : Ensure the spring-loaded brake lever (the piece
Are you putting this together for a or a custom spool swap ? It must go behind the two plastic guide
To "put together" or reassemble a VHS tape (such as for a spool swap or repair), you need to ensure the tape path is correctly threaded around the internal rollers and the locking mechanisms are properly seated before closing the shell. Reassembly Steps