Truck U Series: Powerstop Z36 Extreme Truck & Tow Brake Kit Install Link

Loosen lug nuts, jack up the vehicle, and secure it with .

Remove old hardware from the caliper bracket and install the new stainless steel clips provided in the kit. Loosen lug nuts, jack up the vehicle, and secure it with

Check your brake fluid reservoir; it should be about half-full. : Loosen lug nuts

Repeat the process for the remaining wheels, then bleed the brakes if necessary (required if calipers were replaced). jack up the vehicle

Clean the hub surface and the new PowerStop rotors with to remove any protective oils.

Use a C-clamp or caliper tool with an old brake pad to .

Reinstall the caliper bracket and torque to factory specifications.