: Fully retract the boom. Turn the potentiometer counter-clockwise until it stops to reset the "zero" point.
: Measure the signal between Pin 2 (signal) and Pin 1 (ground). Use a voltmeter at test point MP4 on the main board. 2. Angle Sensor Adjustment n_031.mp4
: Lower the boom completely to remove rest pressure. Disconnect hydraulic hoses. : Fully retract the boom
The filename n_031.mp4 frequently appears in technical contexts related to crane systems, specifically associated with documentation for the DS 350 and EI 65 series Load Moment Indicators (LMI). n_031.mp4
The angle sensor ensures the crane's boom is at the correct pitch for safe lifting.