Function Generator Using Icl8038 Pdf -

To build a functional generator, the following external components are required: Timing Capacitor (

: Monitor the sine wave on an oscilloscope and adjust the trimmers on Pins 1 and 12 until the waveform is smooth and rounded. Function Generator Using Icl8038 Pdf

The ICL8038 operates by charging and discharging an external capacitor with two internal current sources. This process creates a linear triangular wave. To build a functional generator, the following external

: Adjust the main potentiometer connected to Pin 8. The frequency ( ) is roughly calculated as : Adjust the main potentiometer connected to Pin 8

) : Connected to Pins 4 and 5 to control the charge/discharge current. : Frequency Control : Adjusts the current to Pin 8. Duty Cycle : Balances RAcap R sub cap A RBcap R sub cap B for symmetry. Distortion Trim : Two 100k Ωcap omega

: Triangle wave linearity is approximately 0.1%.

) : Connected between Pin 10 and ground; determines the frequency range. Timing Resistors (