: Before powering on, ensure the jumper on the motherboard is set to the correct voltage for your screen ( 3.3V, 5V, or 12V ) to avoid damaging the panel. Flash the Firmware : Insert the USB drive into the board's USB port. Connect the 7-key keyboard to the board.
: Copy the 1024x600 .bin file directly to the root directory of the USB drive. Do not place it inside a folder. Download SK105A 1024X600 Firmware USB zip
Connect the power adapter. The standby light on the keyboard should begin , indicating the update is in progress. Warning : Do not disconnect power during this stage. : Before powering on, ensure the jumper on
: If the light doesn't flash upon power-up, the board may not recognize the USB drive. Ensure it is formatted to FAT32 and the file is in the root directory. : Copy the 1024x600
: Typically named UTS6710_03F_100.bin or similar, though names may vary by manufacturer.
The flashing process is automatic once the board detects the correct file on a USB drive.
: Once the light stops flashing (usually turns solid green or red), the update is complete. Power off, remove the USB drive, and connect your LVDS cable to test the display. Troubleshooting