Use a tool like WinRAR to extract the .bin file from the .rar archive.
Because this is a hardware-level dump, you cannot simply put it on a USB drive. You must follow these steps: Download DUMP STAR mini GD25Q32 rar
You will need a flash programmer (e.g., CH341A ) and a SOIC8 clip or a soldering iron to connect the GD25Q32 chip. Use a tool like WinRAR to extract the
Ensure your receiver model exactly matches "STAR mini" to avoid "No Signal" or remote control compatibility issues. Ensure your receiver model exactly matches "STAR mini"
Always backup your original flash data before overwriting it, even if it is corrupted.
For official drivers and MCU utilities, visit the GigaDevice Download Center .
Use programming tools such as the GD-Link Utility or universal programmer software like NeoProgrammer. Flashing Process: Erase the existing corrupted data on the chip. Open the extracted DUMP_STAR_mini_GD25Q32.bin file. Write/Program the file to the IC. Verify the data to ensure it was written correctly. Important Notes