C2.zip Review

To put together a "long piece" using a (zipper tape by the yard), you need to attach a slider to the teeth of the tape. This is a common technique for making custom-length zippers for large projects like upholstery cushions , bags, or outdoor gear. How to Assemble a Continuous Zipper

Insert the second (shorter) side into the other track of the slider.

Are you working on a specific type of project, like a or a garment , that requires a particular sewing technique? How To Put A Zip Head On A Continuous Zip c2.zip

: Trim one side of the zipper teeth down by about 1/4 inch. This creates a "lead" that makes it easier to guide the slider onto the other side first. Insert the Slider :

: If your zipper tape isn't quite long enough, you can "extend" it by sewing fabric tabs to the ends, which also provides a cleaner finish for the edges. To put together a "long piece" using a

Slide the first side of the tape into the wider end of the zipper slider.

: Hold both tape ends firmly and pull the slider down onto the teeth. If the teeth don't align correctly, remove the slider and try again to avoid a bulging track . Are you working on a specific type of

: Once the slider is on, sew across the bottom and top of the zipper to create a permanent stop, or install metal zipper stops with pliers. Expert Tips for Long Projects