126157 -

Gradually stretch the fabric toward the side rails.

Apply adhesive to the metal rim and the edge of the fabric. Let it become tacky before pressing them together. Work in small 6-inch sections. 4. Trimming and Reassembly 126157

Use a heat gun carefully on a low setting to warm the fabric; this makes it more pliable and helps pull out factory fold lines. Gradually stretch the fabric toward the side rails

Clamps (clothespins or binder clips), a heat gun or high-powered hair dryer, and a sharp utility knife. Step-by-Step Installation Process 1. Bow Insertion and Centering Work in small 6-inch sections

The BMW 2002 headliner is supported by metal bows that slide into sewn-in loops. Lay the new headliner flat on a clean surface. Slide the metal bows into their respective loops.

Cut the loops slightly to expose only the very ends of the bows for mounting.

Pull the headliner toward the front windshield and rear window. Use clamps to hold it in place temporarily.